0 Members and 1 Guest are viewing this topic.

Brock Arifovic

  • Dogtooth Tuna
  • ****
  • 610
  • Liked:
  • Likes Given: 0
Re: Carbontex Drag Washers
February 07, 2009, 06:04:25 PM
I Know that it is off the topis but have agreat trip Duncan & Janelle, watch out for excess luggage, & that goes for you to Duncan

Greg Burt

  • Giant Trevally
  • *****
  • 1134
  • Liked:
  • Likes Given: 0
Re: Carbontex Drag Washers
February 07, 2009, 07:12:26 PM
Duncan and Janelle going on a trip?! OH NO!! :o the inmates are running the asylum. ;) ;D
Greg 'FFF' Burt

Brandon Khoo

  • Foundation Moderator
  • Giant Trevally
  • ********
  • 4135
  • Liked:
  • Likes Given: 0
Re: Carbontex Drag Washers
February 07, 2009, 07:13:19 PM
what?! It's just Donkey and Shrek!   ;D
If it swims; I want to catch it!

Gordon Low

  • Guest
Re: Carbontex Drag Washers
February 08, 2009, 12:34:07 PM
Duncan and Janelle going on a trip?! OH NO!! :o the inmates are running the asylum. ;) ;D

Bun, you know us too well!!!  ;D

Gordon Low

  • Guest
Re: Carbontex Drag Washers
February 08, 2009, 12:37:03 PM
Back to the Satiga S-Extreme... as well as the improved drag the handle knob has been made a bit more robust by supporting it on a bush at the bottom rather than a bearing.

Gordon

Andrew Poulos

  • Dogtooth Tuna
  • ****
  • 671
  • Liked:
  • Likes Given: 0
Re: Carbontex Drag Washers
February 08, 2009, 02:34:21 PM
and is that handle a straight swap for the normal dogfight, or can the knob be used?

Gordon Low

  • Guest
Re: Carbontex Drag Washers
February 10, 2009, 12:18:36 PM
Andrew,
I'm not exactly sure what you're asking?
The knob is the same as the Expedition and Dogfight. The difference is that the bottom bearing is replaced by a solid brass bush.

Cheers,
Gordon
Last Edit: February 10, 2009, 12:22:37 PM by Gordon Low

Andrew Poulos

  • Dogtooth Tuna
  • ****
  • 671
  • Liked:
  • Likes Given: 0
Re: Carbontex Drag Washers
February 10, 2009, 12:30:34 PM
I think I was trying to ask is can the normal one be replaced with the one with the brass bush.

Gordon Low

  • Guest
Re: Carbontex Drag Washers
February 10, 2009, 01:57:50 PM
Ahhh, I 'm with you now  ;D
If you can get the bush and the correct spacer and shim you should be able to retrofit the dogfight knob with this setup instead of the bearing. Of course, with all these things you never know 100% until you try it ::)

Cheers,
Gordon

Sachin Chaudhry

  • Bluefin Tuna
  • ***
  • 350
  • Liked:
  • Likes Given: 0
Re: Carbontex Drag Washers
February 10, 2009, 04:49:11 PM
You can always get a machining shop to make you the bushing. I did that for a Stella handle where the lower bearing gave (I had changed the handle and reassembled it wrongly). That modified handle is still going strong.