0 Members and 2 Guests are viewing this topic.

Robert Palcak

  • Red Bass
  • **
  • 211
  • Liked:
  • Likes Given: 0
Varivas line markings
May 03, 2009, 01:21:55 PM
Just a quick one, can somebody please let me know at what interval lengths the red/blue markings on Varivas GT Avani are? I'm sure it says it on the pack, but I cant read Japanese.
<*///><

Brandon Khoo

  • Foundation Moderator
  • Giant Trevally
  • ********
  • 4135
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 01:24:33 PM
red at 25m and blue at 50m
If it swims; I want to catch it!

Robert Palcak

  • Red Bass
  • **
  • 211
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 02:36:12 PM
Thanks Brandon... I wasn't sure if it was 20m or 25m.
BTW - acccording to the line markings, I just put 275m of PE10 on a 18k Stella and I made sure it wasn't over-spooled... does this sound about right?
<*///><

Brandon Khoo

  • Foundation Moderator
  • Giant Trevally
  • ********
  • 4135
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 03:23:03 PM
that's a lot of line to get onto an 18000HG. Shimano specifications states about 240m.
If it swims; I want to catch it!

Jay Burgess

  • Giant Trevally
  • *****
  • 1112
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 04:22:59 PM
that's a lot of line to get onto an 18000HG. Shimano specifications states about 240m.

Yeah I got just under 250m on mine.

Brandon Khoo

  • Foundation Moderator
  • Giant Trevally
  • ********
  • 4135
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 04:46:09 PM
you guys are obviously able to wind it on tighter than I can. I think I'm getting around 230 to 240m max.
If it swims; I want to catch it!

Robert Palcak

  • Red Bass
  • **
  • 211
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 04:55:41 PM
I wouldn't say it was overly tight, but going by the 25m markings, I definately got 275m on.
Do you guys tie the braid straight to the spool... or do you add mono or tape for grip?
<*///><

Jay Burgess

  • Giant Trevally
  • *****
  • 1112
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 05:03:02 PM
I wouldn't say it was overly tight, but going by the 25m markings, I definately got 275m on.
Do you guys tie the braid straight to the spool... or do you add mono or tape for grip?


I use a bit of tape for grip, did you tie straight onto the spool?

Jon Li

  • Giant Trevally
  • *****
  • 1114
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 06:59:26 PM
I wouldn't say it was overly tight, but going by the 25m markings, I definately got 275m on.
Do you guys tie the braid straight to the spool... or do you add mono or tape for grip?


It's advisable not to fill the PE line full to the brim of the spool's lip lest it causes wind knot upon casting , in anycase I stop at around 2~3mm from the spool's lip .

Jon . 
It's not what you don't know that gets you into trouble , it's what you know for sure that ain't so . Mark Twain .

Brandon Khoo

  • Foundation Moderator
  • Giant Trevally
  • ********
  • 4135
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 07:14:00 PM
I tie straight onto the spool

I wouldn't say it was overly tight, but going by the 25m markings, I definately got 275m on.
Do you guys tie the braid straight to the spool... or do you add mono or tape for grip?

If it swims; I want to catch it!

Robert Palcak

  • Red Bass
  • **
  • 211
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 07:50:29 PM
Jay - I just use a single wrap of Shimano tape the reel came with and found the braid bites in well.

Jon - You beat me to my next question... my reel is the new SW 18K, with the "bevelled spool lip". I've spolled it just past where the bevel strats, but the line is still inside the spools outer lip by a few mm's... is that about right, or is it slightly over spooled?

In regards to tension on the line while filling the spool... I try to keep it @ 5-6kg of drag pressure and find that it does pack it on fairly tight. I have gone as high as 8-10kg, but damn that is hard work! :P
<*///><

Brandon Khoo

  • Foundation Moderator
  • Giant Trevally
  • ********
  • 4135
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 08:06:19 PM
Rob, you've gone beyond the point I got to. I spool mine to the point where the bevel starts but not beyond.
If it swims; I want to catch it!

Jay Burgess

  • Giant Trevally
  • *****
  • 1112
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 08:15:19 PM
Jon - You beat me to my next question... my reel is the new SW 18K, with the "bevelled spool lip". I've spolled it just past where the bevel strats, but the line is still inside the spools outer lip by a few mm's... is that about right, or is it slightly over spooled?

Sounds about where I spooled mine to. Never had any problems with wind knots.

Robert Palcak

  • Red Bass
  • **
  • 211
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 08:20:48 PM
Brandon - that would partly explain why I got a little more line on the reel.

Jay - good to hear... if it does become a problem, it's not a huge deal to trim a bit off to avaid wind-knots
<*///><

Luke Wyrsta

  • Administrator
  • Giant Trevally
  • ********
  • GTPopping.com Founder
  • 3293
  • GT Monster
  • Liked:
  • Likes Given: 0
Re: Varivas line markings
May 03, 2009, 08:24:28 PM
Brandon - that would partly explain why I got a little more line on the reel.

Jay - good to hear... if it does become a problem, it's not a huge deal to trim a bit off to avaid wind-knots

Yes, advisable not to spool onto the bevel  ;D