Carpenter product questions!

[Mark Harris]

Yep, you should not be looking at Carpenter Lenny.

You are looking for quite long rods it seems and no rods I know well jump to mind in that range.

Have a good look at the MC Works range though. I guess some would say that MC Works are to jigging rods what Carpenter are to casting rods.  See: http://www.mcworks.jp/rods/index.html

[Chris Webster]

Thats a pretty long jigging rod your after mate. Can i ask why it has to be so long?

Chris

[Jon Li]

Guys ,

At this stage , Carpenter only produce  " deep jigging "  rods equivalent to MC Works' SD ( Southern Deep ) models and both brands have only very few rods to offer for this exclusive usage .

If one were to insist on light jigging rod from Carpenter , try to find BC60M or BC66MR which can be used for jigging albeit they are casting rods .

As for MC Works' light jigging rods in the required class , take a look at NB583SS , NB592SS and RF633LR but they may be difficult to source at the moment .

Jon .

[Brandon Khoo]

The Southern Deep is an absolute beast!! Notwithstanding the same line class, it feels much heavier than even the OH55XHS

[Jay Burgess]

MC works have a few models that would fit the bill... they are impossible to get hold of though!

[Tak Otsuka]

I was away and sorry the delay.

As it is mentioned, Carpenter doesn't produce jig rods longer than 5.6ft.

Cheers,
Tak

[Bwanna Surya]

Hello Tak...I just browsed the Carpenter web and found Endless Passion 810/42...I believe is a new version of this model..Can you please advise the spec of it?...cheers Bwanna

Here's the link to that...http://carpenter-oshirase.blogspot.com/2012/05/blog-post_21.html?m=1

[Tak Otsuka]

Hi Bwanna,

LINE: PE6-8
LURE: 240g
DRAG: 13kg
WEIGHT: 441g

This model is only available as custom model and very similar to EP86/40R-P1.

Cheers,
Tak

Hello Tak...I just browsed the Carpenter web and found Endless Passion 810/42...I believe is a new version of this model..Can you please advise the spec of it?...cheers Bwanna

Here's the link to that...http://carpenter-oshirase.blogspot.com/2012/05/blog-post_21.html?m=1

[Bwanna Surya]

Hello Tak,

Very clear.
Thank you for the prompt response.

Bwanna

Hi Bwanna,

LINE: PE6-8
LURE: 240g
DRAG: 13kg
WEIGHT: 441g

This model is only available as custom model and very similar to EP86/40R-P1.

Cheers,
Tak

Hello Tak...I just browsed the Carpenter web and found Endless Passion 810/42...I believe is a new version of this model..Can you please advise the spec of it?...cheers Bwanna

Here's the link to that...http://carpenter-oshirase.blogspot.com/2012/05/blog-post_21.html?m=1

[Nathan Tsao]

Aloha,

Does Carpenter have an expected date of another production run of Pandora lures? We are in DESPERATE NEED of them, haha!!!

[Tak Otsuka]

Hi Nathan,

Which model are you asking this for?

Cheers,
Tak

Aloha,

Does Carpenter have an expected date of another production run of Pandora lures? We are in DESPERATE NEED of them, haha!!!

[Nathan Tsao]

Aloha Tak,
Thanks for the reply. We are looking for both the 155 and the 155+30 models. They have proved incredibly effective at dredging the bottom this year. Thanks!

[Tak Otsuka]

Hi Nathan,

As far as I know, there is no production planed for 155 in near future but 155 + 30 are coming in 2013 late Q2 or early Q3. I have some in stock for both model and will PM you.

Cheers,
Tak

Aloha Tak,
Thanks for the reply. We are looking for both the 155 and the 155+30 models. They have proved incredibly effective at dredging the bottom this year. Thanks!

[Dmitrii Novgorodtcev]

Hi Nathan,
Carpenter was accepting orders from dealers for both 155 and 155+30 models in September. 5 same colors for both models including black back, blue back and flying fish. The delivery is scheduled for 2013, April. So, they must be available in the internet in about May, I think...

[Tak Otsuka]

Hi Nathan, Sorry it was my mistake, 155 will be also coming at the same time as 155 + 30.