0 Members and 3 Guests are viewing this topic.

Andy Rowe

  • Giant Trevally
  • *****
  • 784
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 17, 2013, 07:38:12 PM
Thanks for your work Clem, very interesting.

I may be changing my attitude on buying the 14k if the weight increases mean a stronger more GT capable reel than the current 10k body allows. Very exciting as the current 10k is no slouch for such a little reel.



Set the ray to GeeT

Ben Lai

  • Fusilier
  • *
  • 22
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 17, 2013, 08:49:15 PM
Is it confirmed that the spool is compatible with 08 SW stella? From the picture it seems the new spool is shorter than the 08 but somehow I heard that the spools are exchangeable.

Clem Henry

  • Fusilier
  • *
  • 110
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 17, 2013, 09:01:19 PM
Cant really tell Ben, it will be great work if the design has shortened the overall length of the shaft...as it will be less likely to bend under pressure.

This is the main problem with some of the Twin power reels, they dont have a bearing in the rotor nut which means less support - especially when the spool is at max height...hence they often bend.

From what you can see...I think it looks great, excellent reel anyway but this will close out most of the niggles

Mark Harris

  • Giant Trevally
  • *****
  • 2739
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 17, 2013, 09:34:42 PM
Clem -  thank you so much for taking the time to run your expert tutored eye over the limited material that has been released to date.  Some interesting insights there.

Ben - I am pretty sure it was Alan Hawk who mentioned that the spools were compatible.
Last Edit: January 17, 2013, 10:13:32 PM by Mark Harris

Rob Langridge

  • Fusilier
  • *
  • 140
  • I intend to live forever...... So far, so good.
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 17, 2013, 11:51:57 PM
This is the main problem with some of the Twin power reels, they dont have a bearing in the rotor nut which means less support - especially when the spool is at max height...hence they often bend.
The Twin Power is not the only spinning reel you see this happen to. I think the biggest cause of a bent main shaft is when a fisherman grabs hold of the spool under a heavy drag setting and heavy line when the spool is at it's max height on the main shaft trying to stop a fish from reefing him. Which in-turn you get rotor flex and a spool rubbing on the rotor. Some may say you need to do this from getting reefed and some may say its neglect or bad technique.
Last Edit: January 23, 2013, 06:04:07 PM by Rob Langridge
Cheers,
Rob

Clem Henry

  • Fusilier
  • *
  • 110
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 18, 2013, 12:20:57 AM
You are right Rob, it is a leading contributor to a bent shaft..

Ian Young

  • Fusilier
  • *
  • 57
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 23, 2013, 04:19:48 AM
Here's a video featuring the 30000 and others in action:

http://tv.shimano.co.jp/movie/promotion/promotion2013_stellasw_2/

Cheers
Ian

Ben Rivers

  • Bluefin Tuna
  • ***
  • 409
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 23, 2013, 12:18:06 PM

Ian Young

  • Fusilier
  • *
  • 57
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 23, 2013, 01:20:16 PM
I laughed at the bit where they use the Stella to winch the truck...multitasking!

Clem Henry

  • Fusilier
  • *
  • 110
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 23, 2013, 05:50:42 PM

Looks like there is more alloy in the bottom of the spool (where the plastic cover used to be) this carries all the way to the rotor arms (should be more rigid than the current model)


That sounds good if true, an 18000SW with 20000SW MAX spool under high drag used to make the rotor arms scrape the spool and the shaft damaged.



I have since read there is a Carbon insert at the bottom, however it is said that the rotor is more rigid than the current model...

Alex Jordan

  • Bluefin Tuna
  • ***
  • 356
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 26, 2013, 02:49:10 AM
Good spot Clem!
I am going to take at guess and plump for no spool backwards compatability - didn't work with the FA and I guess the slow oscillator gear is for line lay ... Could be related to the shorter spool stack if it is shorter?

Either way I will be clamouring to order from Japan as soon as stock is available - absolutely no way it will be launched in the UK this year going by Shimano UK's track record - even if it does see a UK launch at all!

Roll on the Osaka show!

Robert Balkow

  • Guest
Re: New Stella SW 2013 video
January 31, 2013, 09:30:50 AM
News for all tackle fanatics:

http://fishing.shimano.co.jp/product/reel/3168

Cheers
Rob

Mark Harris

  • Giant Trevally
  • *****
  • 2739
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 31, 2013, 11:49:23 AM
Excellent Robert and thank you for digging that out.

So it looks like the folding handle has gone which  is a good news.


Andy Rowe

  • Giant Trevally
  • *****
  • 784
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 31, 2013, 11:51:13 AM
Nice one Robert.

These stellas look very fine, saving up for the 14k  ::)now and hoping the SOM spools will fit on it.

News for all tackle fanatics:

http://fishing.shimano.co.jp/product/reel/3168

Cheers
Rob
Set the ray to GeeT

Mark Harris

  • Giant Trevally
  • *****
  • 2739
  • Liked:
  • Likes Given: 0
Re: New Stella SW 2013 video
January 31, 2013, 12:40:07 PM
As the 14000 is only marginally heavier than the 8000 and 10000, is it safe to assume that the body is the same?