0 Members and 1 Guest are viewing this topic.

Nathan Tsao

  • Red Bass
  • **
  • 177
  • Liked:
  • Likes Given: 0
GTFightClub Hawaiian Shoreline Specific GT Rods
October 13, 2014, 09:17:38 PM
Aloha GT Popping, and a big thanks to Brandon Khoo for allowing me to write this!

Here in Hawaii we eat, sleep, breath, and bleed shoreline GT fishing. For ages our shoreline fishing was dominated by "Slide Bait" style fishing, but in the last couple years GT Popping has become a red hot method for fishing from our rugged shorelines. With a new generation crop of motivated,  dedicated, and informed anglers, we are seeing a massive push towards conservation based GT fishing that Hawaii has not seen since ancient times.
It has been a core mission of GTFightClub to promote the sport, and ethics, of GT popping throughout Hawaii by sharing our combined experiences of this incredible fishery. 

With GTFC as a platform to work off of, I have been able to follow through with the long time dream of developing a line of high quality fishing rods designed for niche purpose. Finding a good shoreline specific GT rod has always been difficult for us because of their rarity. Almost 100% of the time, high end rods needed to be shipped to Hawaii from Japan, AUS, or the US mainland. Most of these needed to be ordered without having any personal experience with the rods, which left us sort of blind and guessing as to what we were buying. With so many local anglers looking for high end gear and having difficulty finding it; I decided that the demand was finally there to move forward on the project of developing the GTFightClub Hawaii Shoreline Specific Rod Series!

To do this we went to custom rod blank builders CTS of New Zealand with our ideas of what we wanted in the ultimate shoreline rod specific to our needs here in Hawaii. It was a complete pleasure working with their friendly staff, and they were more than accommodating during our visit to their factory to work on design specs. I have been building rods for 16 years, and visiting the CTS factory to see the process and touch the raw materials was hugely educating and exciting!!! Upon working with CTS we have achieved our goal of combining our years of on the water experience into rods perfectly suited for our unique environment.


We have since released 3 different models of our GTFC line of rods; each with its own ratings and qualities to match the varied island terrains that we fish.
Each blank is composed of three different types of 100% Japanese Carbon Fiber layered for specific purpose. The inner most layer begins with a Helical Carbon Fiber Core which is the skeleton that retains the hoop strength for the finished rod. Critical for those deep bends while lifting large GTs out of deep water.
The second layer(s) are comprised of Uni-Directional Carbon Fibers which make up the powerhouse of the rod. This is a scrim-less material for retaining maximum strength and minimizing weight. 
The third layer is a finish of Woven Carbon which acts as an impact and ding resistance shield to the inner layers, and also adds some extra hoop retention to the rod. Its function is more for blank durability against sharp lava rocks than anything else. Durability against rock damage was a paramount concern of mine that led to us using this outer layer of carbon fabric.

To finish off the blanks I have added my favorite feature which is a very thin layer of Uni-Directional S-Glass to the top 16" of the blank. This tip section "Bumper" is another layer of protection for those situations when you're popping hard and the lure skips out of the water causing the rodtip to fly backwards and smack into the lava rocks. Many rods get broken in Hawaii for this very reason, and i feel that this feature aids greatly in solving that problem. All the finished rods are then built myself in Kailua-Kona Hawaii.

Our most popular selling model (and my personal favorite) is our PE10 "Desert Eagle" rod.
Specs:
10' 2pc
60/40 split
Line PE8 - PE10
Efficient Lure Range: 140g-180g (without hooks)
Max Lure Range: 200g
Hybrid Guide Train: Fuji MNSG Reduction Guides; Fuji Titanium TiLCSG Lowrider running guides
Best fit reel: Stella 14K-18K
Rod Notes: This is more of a popper rod than anything. It has a ridiculously fast tip recovery which is further enhanced by the wide frame lowrider running guides. Lots of drive through the middle and lower sections to bring fish up from very deep water. Best lure example matches are HammerHead E-Cups, G-Cups, and Heru Bobara 150XXX. It's more powerful from tip to butt than both the MC Works 106XX and RippleFisher Runner Exceed, but heavier than both by design. Its flex pattern is most similar to the Patriot Design Rockfist, yet significantly lighter with equal power. Biggest fish landed on the Desert Eagle so far was a nice 30kilo GT landed in under 3 minutes from the shoreline.
There is an 11? version coming soon to be built as an overhead rod also.
 

Lighter action "Evolution" Model Specs:
10' 2pc
60/40 Split
Line PE5-PE6
Efficient Lure Range: 80-120g (without hooks)
Max Lure Range: 150g stickbaits
Hybrid Guide Train: Fuji MNSG reduction guides, Fuji Titanium TiKWSG running guides
Best Reel Fit: Stella 10K
Rod Notes: Very crisp and responsive feeling rod. This is the perfect rod for situations where all day search casting for maximum distance is needed. It performs best with 100g lures both poppers and stickbaits. The K-series running guides provide line control for using lighter lines in windy conditions. This rod is most comparable to the Zenaq 100HHH in its lure range, but with more power through the middle and butt. Best lure matching examples are Shimano Head Dips, and Heru Tuna 100.   


Crazy Heavy "Armageddon" model Specs:
11' 2pc
60/40 Split
Line PE10+
Lure Range 180-250g+ Poppers
Hybrid Guide Train: Fuji MNSG reduction, Fuji TiLCSG running guides
Best Fit Reel: Stella 18K-20K, or Saltiga Expedition 8000
Rod Notes: You dont want this rod unless you absolutely NEED this rod. It exists for one purpose only, and that is to blast the biggest chuggers through the biggest nastiest ocean conditions out there. There is nothing else like it on the market designed for shoreline GT Popping, it stands in a class by itself. Best lure match examples are Hammerhead G-Cups, I-Cups, and whatever else you may be crazy enough to throw off a cliff.

Another big thanks to both Charles Cintron and Ladd Yoshimura because without these guys the rods would have never been made!
Here are some photos of the finished rods. Thanks for looking

Aloha,
Nate and GTFightClub
 

Trevor Skinner

  • Bluefin Tuna
  • ***
  • 455
  • Liked:
  • Likes Given: 0
Nathan,

Well done. These look like real winners.

The right tools for a difficult job.

Regards,


Trev

Clem Henry

  • Fusilier
  • *
  • 110
  • Liked:
  • Likes Given: 0
Great feedback Nathan,

The Evolution looks great for Kingies off the rocks..

For those who may not be familiar with CTS, I have 11 custom rods built on their blanks - covering most of their saltwater range, popping/sticks - soft bait - drop shot - light casting and surfcasting.

Great blanks that perform very well; large range of options...at least worth a look if considering a new rod/blank.

Clem


Craig Maree

  • Red Bass
  • **
  • 158
  • Release the GT
  • Liked:
  • Likes Given: 0
Hi Nathan

Thanks for the informative info on GT Shore Popping Rods.

I love reading your battles with shore based GT's, with much respect as I know how serious  GT's pull from the shore.

You can't beat popping for GT's from the shore and I have had the privilege of shore popping for them in Mozambique and the Seychelles, with some sessions in the Seychelles being the most insane fishing of my life, with me and a mate landing very good size fishing and been cleaned up regularly.

My addiction to GT Popping actually starting with targeting them from the shore in Mozambique many years ago before braid and Stella's, where we used overhead reals with mono and heavy 10ft Composite Development CD Rods from New Zealand, Graphcast 5.

The key to shore popping in our area is casting distance, as we have to get beyond the shore waves. 

I have been out testing distance between overhead reels and spinning reels and get better distance with overheads.

I am looking at getting a new overhead reel and looking at the Shimano Cranx with a level-wind.

What overhead reels are you guys using and what difference in distance are you getting between overheads and spinning?

Thanks

Craig
Last Edit: October 15, 2014, 01:47:11 PM by Craig Maree
Atoll Hunter GT Popping
www.facebook.com/atollhunter

Nathan Tsao

  • Red Bass
  • **
  • 177
  • Liked:
  • Likes Given: 0
Aloha Craig,

Shoreline GT's are the ULTIMATE, haha!!!
I also very much prefer to use overhead reels for both casting distance and also for throwing extra long heavy leaders. Right now my favorite overhead is the Daiwa Saltiga Hyperspeed 40LD. I like this reel for lures 150g-180g with PE8 Blackwater Hollowcore. It has all the drag you need to lock down on bigger fish. This reel goes on my 11'6" PD Rockfist, and with this setup i will consistently hit 100m casts and with a little tailwind i can easily hit over 120m casts. This is with about 10-12m of 125lb Ande mono with a 2m section of 200lb Ande tied outside the tip.
 
The Hyperspeed 30LD is also a sweet reel and the casting performance exceeds the 40 in terms of useable lure weights. The spool weight of the 40 is pretty heavy so it needs good sized lure to get that spool spinning properly. In contrast, the spool of the 30LD is much lighter which allows you to get the spool up and spinning with much lighter lures in the 60g-75g range. I use the 30 with 80lb JB Hollow and usually 100g lures. Becasue its so much smaller; the 30 has less drag capability and has less cranking power than the 40. Its a great reel for distance, but maybe not so much for larger (30kilo) sized GTs.

Nathan Tsao

  • Red Bass
  • **
  • 177
  • Liked:
  • Likes Given: 0
Thanks Trevor and Clem! We hope everyone likes them as much as we do! One of these days we just may take a trip to Oman for a pure shoreline GT trip and try and break that 50kg mark from the rocks!

Gerhard Delport

  • Fusilier
  • *
  • 130
  • Spinaholic
  • Liked:
  • Likes Given: 0
Nathan,

These rods looks like beast tamers...

As soon as I have confirmation that I am moving to a project on the Red Sea next to Yemen I will be in contact to order one.

There are big GT's out there waiting and they are hungry

Felix Lux

  • Fusilier
  • *
  • 118
  • Liked:
  • Likes Given: 0
Good on you Nathan!
The rods sound great, except that pe10+ model...I'm hurting just thinking about that brutal beast haha!
I also have 2 CTS blanks, one of the blanks modified by CTS according to my needs. They have been great to deal with and the end result is exactly what I wanted. Definitely a fan.

Alex Jordan

  • Bluefin Tuna
  • ***
  • 356
  • Liked:
  • Likes Given: 0
Awesome work there Nathan - love the rod finish and the extra touch on the foregrip!

Do you not get on with the bigger K series frames for the reduction guides?

I have been eyeing up the blanks and will more than likely go for the Desert Eagle to build up :)

Craig Maree

  • Red Bass
  • **
  • 158
  • Release the GT
  • Liked:
  • Likes Given: 0
Thanks Nathan, hope that monster 50kg GT comes knocking and tries to breakdown your door soon.

Cheers

Craig
Atoll Hunter GT Popping
www.facebook.com/atollhunter

Craig Maree

  • Red Bass
  • **
  • 158
  • Release the GT
  • Liked:
  • Likes Given: 0
Nathan when building your overheads rods what space do you allow between the rear of the rod and the reel seat?

Have a 9.6ft rod what spacing would you recommend for this?

Cheers

Craig
Atoll Hunter GT Popping
www.facebook.com/atollhunter

Felix Lux

  • Fusilier
  • *
  • 118
  • Liked:
  • Likes Given: 0
Nathan will be a better indicator for heavy GT rods and definitely the guy to ask.

Generally though it's very much personal preference, will vary a lot with your casting style/technique and is also a matter of how long your arms are.

For example if your focus is more on casting and fishing lighter lines I'd personally have the middle of the reel seat (where the reel foot is) 60cm from the very bottom (bottom end of butt cap). I'm 186cm and have about normal length arms. As said this reel seat position is more focused on casting, not on fighting the fish! And it's for a high mount casting technique, which i guess most guys using overheads for spinning would use.

If your arms are about the length of mine and you're fishing 60 or even 100lb hollow with according drag settings of over 10kg, I'd definitely have the reel seat a bit lower. You'll loose a bit of casting distance or would have to put more effort in for the same distance, but a really high reel seat would be a killer with a 9'6 pe8 popping rod...unless you're a big strong guy.

Stuart Rowley

  • Phytoplankton
  • *
  • 3
  • Liked:
  • Likes Given: 1
How or where can you buy these rods, please??

Alex Jordan

  • Bluefin Tuna
  • ***
  • 356
  • Liked:
  • Likes Given: 0
Hi Stuart - you can buy direct from CTS in NZ if you are outside of Hawaii - one is winging its way to the UK now :D

max renigado

  • Phytoplankton
  • *
  • 6
  • Liked:
  • Likes Given: 0
Stuart u can message Nate directly