GTPopping.com - Giant Trevally, GTPopping, Topwater & GT Fly-Fishing Resource

GTPOPPING.COM Sponsors (Historical) => Fishhead Specialist Fishing Tackle => Topic started by: Duncan O'Connell on January 10, 2012, 12:12:58 PM

Title: JM 16000 Spools
Post by: Duncan O'Connell on January 10, 2012, 12:12:58 PM
Hey guys,

Just got a new shipment of JM 16000 Monster Spools

Will be on the website soon!

They are priced at $259

Cheers
Tom
Title: Re: JM 16000 Spools
Post by: Duncan O'Connell on January 25, 2012, 12:24:06 PM
JM 16000 Spools and JM Power Arms now on the Website

Spool
http://www.fishhead.com.au/store/products/JM-Monster-Drag-16000-Spool.html (http://www.fishhead.com.au/store/products/JM-Monster-Drag-16000-Spool.html)

Power Arm
http://www.fishhead.com.au/store/products/JM-Power-Arm.html (http://www.fishhead.com.au/store/products/JM-Power-Arm.html)

Title: Re: JM 16000 Spools
Post by: Peter Childs on January 25, 2012, 07:12:42 PM
Hey Tom,

Just had a look at the specs on the new JM handle.......holy crap, are they really 103mm long?

I note the regular Shimano handle for the 8000/10000 is 70mm and my Yumeya 'Long' handle is only 75mm!.....that makes the JM a handle and a half (quite literaly)!

I would assume there has been some extensive testing?.......No broken drive trains or snapped handles?  Any feedback from Shimano?

......No complaints of Tennis Elbow?
Title: Re: JM 16000 Spools
Post by: Duncan O'Connell on January 26, 2012, 09:24:05 AM
Hey Tom,

Just had a look at the specs on the new JM handle.......holy crap, are they really 103mm long?

I note the regular Shimano handle for the 8000/10000 is 70mm and my Yumeya 'Long' handle is only 75mm!.....that makes the JM a handle and a half (quite literaly)!

I would assume there has been some extensive testing?.......No broken drive trains or snapped handles?  Any feedback from Shimano?

......No complaints of Tennis Elbow?



Hi Peter,

Yep 103mm
But measured the same way the Stella handles are around 90mm (hard to tell exactly on my tape measure.

If you were to measure the JM handle the same way as the Stella and Yumeya it would be around 80mm

Basically, the JM handle is 1cm longer than the stock handle. Giving you a little more cranking power on the reel.

JM tested them and found no issues with the longer handle.
An Engineering friend of ours actually made us a longer handle for a Saltiga a while ago and that was pretty awesome to use.

Hope this helps,

Tom
Title: Re: JM 16000 Spools
Post by: Peter Childs on January 26, 2012, 11:17:40 AM
Thanks Tom, that makes a bit more sense.....they are not measuring centre to centre!

I'll shoot you an order!
Title: Re: JM 16000 Spools
Post by: michael north on January 26, 2012, 04:16:53 PM
Tom, i have a 2010 saltiga 5000h and was thinking a long than standard handle would be nice, what are the lenghts of the mcworks and JM handles
Title: Re: JM 16000 Spools
Post by: Duncan O'Connell on January 27, 2012, 01:47:22 PM
Tom, i have a 2010 saltiga 5000h and was thinking a long than standard handle would be nice, what are the lenghts of the mcworks and JM handles

Hi Michael,

The JM handles are 10mm longer than the 2010 Saltiga stock handles.

The longer handle is actually really nice to use.

Cheers
Tom
Title: Re: JM 16000 Spools
Post by: michael north on January 27, 2012, 02:04:12 PM
Cheers Tom,

Do the JM arms come with a handle?
Title: Re: JM 16000 Spools
Post by: Duncan O'Connell on January 27, 2012, 02:33:44 PM
No knobs on the arms Michael.

Cheers
Tom
Title: Re: JM 16000 Spools
Post by: michael north on January 27, 2012, 02:53:27 PM
Sorry for all the questions Tom,

do you know if the knobs fit on the arms
Title: Re: JM 16000 Spools
Post by: Duncan O'Connell on January 27, 2012, 03:40:17 PM
Yep the stock knobs will fit
I would imagine any knob that fits on stock handle will fit on JM handle
Title: Re: JM 16000 Spools
Post by: michael north on January 27, 2012, 05:02:49 PM
Cheers Tom,

Much appreciated
Title: Re: JM 16000 Spools
Post by: Stu Hardy on January 30, 2012, 12:28:28 PM
Do the aftermarket handles, either JM or MC Works make a great difference for popper fishing with a stella? I have one for jigging on a 8000pg, and love the action I get with it, but do I need one for a 10000SW?
Title: Re: JM 16000 Spools
Post by: Ben Furness on January 30, 2012, 01:53:11 PM
I was down at the shop the other day having a look at these spools. Not the prettiest in the ocean but they look rock solid!
Title: Re: JM 16000 Spools
Post by: Duncan O'Connell on January 30, 2012, 03:35:09 PM
Do the aftermarket handles, either JM or MC Works make a great difference for popper fishing with a stella? I have one for jigging on a 8000pg, and love the action I get with it, but do I need one for a 10000SW?

The main difference Stu is the increased cranking power with the longer handle.
You're effectively creating a longer lever and thus it takes less energy.

I fished 2 combo's on my last trip side by side. One Dogfight with a standard handle, and one with an aftermarket handle which was 10mm longer. I have to say, whilst i didn't notice it  as much whilst retrieving my lures, i found i always preffered the longer handle when fighting the fish.

Hope this helps,

Cheers
Tom