0 Members and 1 Guest are viewing this topic.

Wong Kai Zhee

  • Fusilier
  • *
  • 48
  • Liked:
  • Likes Given: 0
Gunz tailwalk, through wire construction?
November 29, 2012, 01:44:39 AM
hi, i am wondering if gunz tailwalk 180 are through wire or not?

anyone have any first hand experience? cus i ve heard conflicting views.

packin f oman, my first big GT trip, so wondering if they can stand up to pe10.

many thanks!

Tan Wah Leng

  • Phytoplankton
  • *
  • 4
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
November 29, 2012, 02:21:09 AM
KZ,

pack some halco rooster, preformed well during my trip.

Regards

Wong Kai Zhee

  • Fusilier
  • *
  • 48
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
November 29, 2012, 02:24:44 AM
arh, no prob.

may we share a boat next yr.

Brandon Khoo

  • Foundation Moderator
  • Giant Trevally
  • ********
  • 4135
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
November 29, 2012, 08:56:12 AM
They are not suitable for heavy GT gear, Wong.
If it swims; I want to catch it!

Wong Kai Zhee

  • Fusilier
  • *
  • 48
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
November 29, 2012, 12:59:41 PM
ok. i will bring along something stronger.

many thanks, Brandon.

Peter Olesen

  • Red Bass
  • **
  • 151
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
November 30, 2012, 04:38:49 AM
Hi Wong

I think this video backs up Brandons answer pretty good (go to app. 1min 15sek):
"If I had more time, I would have written a shorter letter." Mark Twain

Wong Kai Zhee

  • Fusilier
  • *
  • 48
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 01, 2012, 05:47:58 AM
can see that it didnt managed to last long under the pressure.

guess i will just leave them at home.

many thanks!

Jason Lai

  • Fusilier
  • *
  • 26
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 05, 2012, 12:58:51 AM
Any others recommendation on the more reliable Sinking Stickbait ?
Fishing is my passion, working is my hobby.

Mark Harris

  • Giant Trevally
  • *****
  • 2739
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 05, 2012, 11:54:54 AM
There are so many which are successfully used in GT fishing Jason. It depends on how you want to use them, your budget etc.

For fast-sinking types to really have a go at fish which are deep, I would recommend Orion Bigfoot 170 grams and up, and Carpenter Pandora 155+30.

For slow sinking types to work higher in the water column, have a look at:

ASWB SS in various sizes
Orion S-Kiv
Shimano Ocea Pencil 110 gram (a good alternative to the Gunz Tailwalk as they have a similar action but are much better quality)
Heru Bobara

The best of luck.
Last Edit: December 05, 2012, 12:24:25 PM by Mark Harris

Jason Lai

  • Fusilier
  • *
  • 26
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 05, 2012, 01:54:37 PM
Hi Mark, thanks for the advise... ;) I think I have 15pcs of the Gunz which i need to clear it off after watching the video.. :-[
Fishing is my passion, working is my hobby.

Mark Harris

  • Giant Trevally
  • *****
  • 2739
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 05, 2012, 02:38:56 PM
For like-for-like replacement of Tailwalk Gunz, I suggest you can look at Ocea Pencil, Saltiga Dorado and Smith Baby Runboh - similar types of lures but much better built.

Mark Armistead

  • Red Bass
  • **
  • 176
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 06, 2012, 06:59:44 AM
The tailwalk Gunz have proven for me that they are real kingfish slayers.
I have seen some pull the wire out causing us to lose fish, have not seen it happen for a couple of years now.
Here in NZ the same lures are sold under a the starwalker brand, i spoke to the distributer prior to him bringing these lures in. The main thing i reccomended to him was to get stronger wire construction, according to him the ones coming in here have been built stronger. I have used them under the starwalker brand a lot and have not seen any issues with the wire and we have nailed soem good fish on them. Granted Kings dont put near the strain on lures that GTs do!!!!.
Cheers Mark

Wan Izhan

  • Fusilier
  • *
  • 135
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 06, 2012, 01:31:46 PM
 ;D don't leave home without them! ;D

Brandon Khoo

  • Foundation Moderator
  • Giant Trevally
  • ********
  • 4135
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 07, 2012, 10:44:45 AM
Mark, are you sure that the Starwalkers are the same lures sold under a different brand? I suspect that these are probably dreaded OEM replicas. I have heard this claim heaps of times before from tackle stores and agents saying that their lures come from the same factory as the original.

The reason I say this is because Tailwalk replicas are in Australia being sold under another name, and for more than I can buy the originals in places like Singapore. Just ridiculous.


The tailwalk Gunz have proven for me that they are real kingfish slayers.
I have seen some pull the wire out causing us to lose fish, have not seen it happen for a couple of years now.
Here in NZ the same lures are sold under a the starwalker brand, i spoke to the distributer prior to him bringing these lures in. The main thing i reccomended to him was to get stronger wire construction, according to him the ones coming in here have been built stronger. I have used them under the starwalker brand a lot and have not seen any issues with the wire and we have nailed soem good fish on them. Granted Kings dont put near the strain on lures that GTs do!!!!.
Cheers Mark
If it swims; I want to catch it!

Titahi brown

  • Fusilier
  • *
  • 37
  • Liked:
  • Likes Given: 0
Re: Gunz tailwalk, through wire construction?
December 07, 2012, 08:03:19 PM
I,m not 100% sure but I do have a measure of faith in the NZ Importer Brandon, he is also closely associated with the Jigstar brand and has alot of integrity. I managed a 100 odd  kilo striped marlin on one that held up to the thrashing very well








Last Edit: December 07, 2012, 08:05:16 PM by Titahi brown